
The TDA2030 Stereo Amplifier is a Class AB Amplifier whose output power is 18w + 18w and it is a circuit that operates on a (+15v 0 -15v) DC supply.
Table of Contents
Stereo Amplifier Working :
The TDA2030 Amplifier can run from 15-0-15. Its output power is18w. This IC is capable of running on dual power (+ 15-0–15 V) and single power (0- + 15 V). This amplifier can load two 20w speakers. This stereo amplifier is an easy-to-use potentiometer mounted on the PCB. It can be easily used for all amplifier projects.
Circuit Diagram :
I designed A circuit Diagram from Easy EDA Site

Needed Components :
- TDA2030 IC – 2
- 22k Resistor – 4
- 1k Resistor – 2
- 100 ohms resistor – 2
- 680 ohms Resistor – 2
- 473j Capacitor – 2
- 223j Capacitor – 2
- 104j Capacitor – 2
- 47k Potentiometer – 1
Needed Tools :
- Soldering Iron
- Soldering Past
- Lead
- Soldering Stand
- PCB Holding Stand
- Cutter
How To Make :
I designed the TDA2030 Stereo Amplifier Circuit on the Easy Eda website and created the Gerber file. I uploaded this Gerber file on the JLCPCB website and ordered 10 PCB which costs 2 dollars. PCB was delivered in 1 week. I bought the required components in the Electronic Shop and then I put all the components in the PCB and then soldered using the soldering iron and then cut the Excess Terminal and cleaned the PCB.
A standard aluminum heat sink plate must be attached to control the excess heat generated when the TDA2030 IC is running. Important: Must Attach The Insulation Material For IC Backside.
PCB Layout :
TDA2030 Stereo Amplifier TOP TDA2030 Stereo Amplifier BOTTOM
Gerber File :
Download this Gerber file and use it to order PCB
Make Video :
Also watch the full tutorial of this project on our youtube channel