150W Transistor Power Audio Amplifier

This circuit Using For Power Audio Amplifiers & Heavy Bass Mono Amplifiers, We will Build 150w RMS output power Amplifier Using  Transistors.

Power Audio Amplifier Circuit Diagram:

Components Needed:

• U10,U11 – .22 ohms 2w Resistor
• Q4 – 2sc5200 Transistor
• Q5 – TTA1943 Transistor
• Q3 – TIP127 Transistor
• Q2 – TIP122 Transistor
• R4 – 10ohms 1w Resistor
• C1 – 100nf Capacitor
• R5 – 150 ohms 1w Resistor
• R1,R2,R12 – 10k Resistor
• C13 – 100pf Capacitor
• R14 – 56 ohms 1w Resistor
• R7,R6 – 1k /1w Resistor
• R9 – 1k Resistor
• U3,U2 – 12v 1w Zener Diode
• C9,C10,C11 – 10uf Capacitor
• R8, R11 -47k Resistor
• C12 – 47nf Capacitor
• C2 , C6 – 47uf/63v Capacitor
• R10 – 2k2 Resistor
• U4 – 4558JRC IC
• R13 – 33k Resistor

Tools Needed :

• Soldering Iron
• past
• lead
• PCB Holding Stand
• Soldering Iron Stand

How To Make :

First I designed the Amplifier Circuit on the Easy Eda website and created the gerber file. I uploaded this gerber file on the JLCPCB website and ordered 10 PCB which costs 2 dollars. PCB was delivered in 8 days. I bought the required components in the Electronic Shop and then I put all the components in the PCB and then soldered using the soldering iron and then cut the Excess Terminal and cleaned the PCB.

PCB Layout :

Gerber File :

PCBA from $0（Free Setup,Free Stencil),Get Coupons Here : https://jlcpcb.com/IYB

Download this Gerber file and use it to order PCB