100w Mono Amplifier

100w Mono Amplifier

This circuit Using For Subwoofer Amplifiers & Heavy Bass Mono Amplifiers, We will Build 100w RMS output power Amplifier Using  Transistors.

Circuit Diagram :

I designed A circuit Diagram Fro Easy EDA Site

100w Mono Amplifier Circuit

Components Needed :

PartsQuantity
2SC5200 Transistor1
2SC1943 Transistor1
TIP122 Transistor1
TIP127 Transistor1
10k Resistor3
150 ohms 1/2w Resistor1
1k 1/2w Resistor2
1k Resistor1
47k Resistor1
33k Resistor1
5.6 ohms 1/2w Resistor1
10 ohms resistor1
2k2 Resistor1
HRC4558 IC1
47uf Capacitor2
10uf Capacitor2
.22nf Capacitor1
100nf Capacitor1
47nf Capacitor1
12v 1w Diode2
Buy Store

Tools Needed :

  • Soldering Iron
  • past
  • lead
  • PCB Holding Stand
  • Soldering Iron Stand

How To Make

First I designed the Amplifier Circuit on the Easy Eda website and created the gerber file. I uploaded this gerber file on the JLCPCB website and ordered 10 PCB which costs 2 dollars. PCB was delivered in 8 days. I bought the required components in the Electronic Shop and then I put all the components in the PCB and then soldered using the soldering iron and then cut the Excess Terminal and cleaned the PCB.

PCB Layout :

Gerber File :

Download this Gerber file and use it to order PCB

Make Video :

Also watch the full tutorial of this project on our youtube channel

2 Comments

  1. Manimaran August 4, 2020
  2. Prem kumar August 12, 2020

Add Comment